Welding repair built for strength, not cosmetic patches.
When metal breaks under heavy load or rots out from salt and weather, slapping filler wire over dirt only wastes time. We diagnose why the joint failed, grind away contaminated metal, prep a clean root pass, and rebuild the connection stronger than the day it came out of the factory.
Common structural failures we fix on-site
Sheared bevels and stress cracks prepped and re-welded with full penetration.
Thin oxidized metal torched out and replaced with fresh structural plate.
Heavy equipment damage straightened, reinforced, and gusseted for load.
Structural frames, trailer tongues, brackets
Security gates, residential rails, hinges
Machinery housings, manifolds, engine blocks
Food service gear, tanks, architectural trim
Truck beds, marine hulls, ladder racks
Repairs are deep-beveled and welded to original tensile capacity. We service contractors, commercial facilities, and property owners throughout the South Bay.
Common field repairs across San Jose
When metal cracks, shears, or rusts out, hauling it to a fixed shop delays your job. Our mobile welding rig brings industrial power tools, wire feeders, and structural electrodes straight to your home, job site, or commercial yard.
Torn barrel hinges, sagging swing gates, and cracked mounting plates from wind or vehicle impact.
Bevel grinding, heavy plate gussets, and high-penetration MIG welding to restore square alignment and swing clearance.
Rusted base flanges, wobbling commercial balusters, and broken welds failing code compliance inspection.
Core mount reinforcement, full joint penetration sleeves, and site grinding for clean, continuous safety handholds.
Stress fractures across excavator arms, loader bucket ears, skid steer quick-tach plates, and backhoe teeth.
Deep carbon arc gouging, pre-heat treatment, multi-pass hardfacing, and high-tensile alloy re-welding.
Cracked A-frame tongues, sheared leaf-spring hangers, cracked crossmembers, and bent loading ramps.
Fishplate boxing, structural angle sistering, and continuous root-and-cap welds to restore load carrying capacity.
Broken pickets, rusted perimeter rail joints, sheared latch receivers, and bent security mesh panels.
On-site cutout of corroded sections, solid bar splice inserts, and weather-resistant perimeter welding.
Damaged warehouse bollards, sheared beam connection clips, car park post impact damage, and awning tabs.
Jack-supported load bracing, heat straightening, heavy steel flitch plating, and structural stick welding.
Have a cracked bracket, gate, or broken equipment?
Send photos for a rapid repair assessment, or call directly to arrange mobile field welding.
Send a photo of the break for a quick assessment
Talk directly to an experienced welder serving San Jose and the South Bay. Send a snapshot of the damaged equipment, gate, or machinery, and we will tell you the best repair approach.